Removing An Ir Or Anti-Aliasing Filter; Inserting A Filter - Kodak DCS PRO BACK - USER'S GUIDE Manual

About the DCS Pro Back Plus

Removing an IR or Anti-aliasing Filter

CAUTION:
The Anti-aliasing filter and IR filter are fragile
devices and must be handled with care.
Slide the Filter latch to the right, then carefully
remove the filter.
"
Store the unused filter in the pocket of the
included body cap
Back
Contents
(page 79).
Next

Inserting a Filter

Insert the two tabs at the bottom of the filter
1
into the slots on the DCS Pro Back Plus.
Gently press the top of the filter into place until
2
it is latched.
Index
21