Warnings And Cautions - Kodak DCS Pro Back Plus User Manual

Warnings and Cautions

Warnings and Cautions
To prevent fire or shock hazard, use only the
!
recommended accessories and attachments.
Use only the power source type indicated on
!
the name plate of the AC adapter. A line
voltage outside this range can destroy the AC
adapter and/or the DCS Pro Back Plus.
Do not substitute other types of cables for
!
supplied cables or cables listed in the System
Requirements section
Do not remove a CF Card from the camera,
!
disconnect or turn off a battery supply, or
disable the AC adapter while the Card Busy
LED inside the Card door is blinking. The
blinking indicates that data is being read from
or written to the card. You may lose data if you
remove a card at this time.
Back
Contents
(page 12).
Next
Use extreme care when handling CF Cards as
!
they are easily damaged. If dropped, the CF
Card may be destroyed, resulting in the loss of
all data.
Do not use the DCS Pro Back Plus where it
!
can come in contact with water. It is not
waterproof or splash-resistant.
Handle the DCS Pro Back Plus with care.
!
Treat the anti-aliasing filter with the greatest of
care. It is a very expensive device.
Retain the safety and operating instructions for
!
future reference. Retain the packing case for
use if your camera needs to be shipped.
Treat the imager with extreme care. It is very
!
expensive to replace.
The anti-aliasing or IR filter is exposed when
!
the cap is removed. Do not touch or strike this
filter or set it down on a surface.
Index
88