Kodak DCS Pro Back Plus User Manual page 36

The Basics
Position the slots at the bottom of the DCS Pro
4
Back Plus on the locating posts on the camera
body or MAMIYA interface plate.
Press the safety release pin (located at the top
5
of the DCS Pro Back Plus Release button) and
slide the DCS Pro Back Plus Release button
to the right.
Contents Back
Contact pads
6
IMPORTANT:
Ensure that the DCS Pro Back Plus is firmly
attached before releasing your grip.
7
Next
Index
Gently press the DCS Pro Back Plus onto the
camera back or to the attached DCS Pro Back
Plus MAMIYA interface plate.
The DCS Pro Back Plus Release button snaps
back to its original position.
Complete the assembly (page 33).
36