Caring For Your Dcs Pro Back Plus; Cleaning; Cleaning The Dcs Pro Back Plus; Cleaning The Ir Or Anti-Aliasing Filter - Kodak DCS Pro Back Plus User Manual

Caring for Your DCS Pro Back Plus

Cleaning

Caring for Your DCS Pro Back Plus
Clean the camera body as described in the
HASSELBLAD or MAMIYA User's Manual.

Cleaning the DCS Pro Back Plus

1 Turn the DCS Pro Back Plus off or disconnect
the DCS Pro Back Plus from the computer.
2 Using a lint-free cloth with light pressure, clean
only the outside enclosures and the Image
LCD panel.
IMPORTANT:
Do not use liquid cleaners or aerosol cleaners on
the outside of the DCS Pro Back Plus.
Before connecting the DCS Pro Back Plus to the
camera body, clean the slots at the bottom of the
DCS Pro Back Plus and the locating posts on the
camera body using isopropyl alcohol on a lint-
free lens cleaning tissue.
Contents Back

Cleaning the IR or Anti-aliasing Filter

1
2
3
Next Index
Remove the filter from the DCS Pro Back Plus
(page 21).
Gently blow off the dust using commercially
available canned air (low pressure). If the filter
is still dirty, contact your dealer or service
representative.
If the imager is dirty, check the KODAK Web
site (www.kodak.com) for instructions on
cleaning. Choose Service and Support, then
under Professional Photography choose
Cameras, Digital and choose DCS Pro Back
Plus. Follow the instructions under Cleaning
Recommendations for CCD Coverglass.
78