Configuring Illegal Access Event Settings - Honeywell H4L6GR2 User Manual

Ultra HD IP Camera User Guide
You can configure settings for each type of event.
To enable network event detection:
1.
2.
3.
4.
5.
6.
7.
8.

Configuring Illegal Access Event Settings

An illegal access event occurs when a specified number of unsuccessful login attempts is
exceeded.
44
On the Network tab, select the event type that you want to configure from the Event
Type list (Network Disconnected or IP Conflict).
Select the Enable check box.
In the IP Address field, enter the IP address of the headend, and in the Time field, enter
the countdown time. If no connection is established with the IP address within the
specified time, the system will will detect a network disconnection event.
To start recording video when the event is detected, select the Record check box.
In the Record Delay field, enter the number of seconds that the system will continue to
record video after the event has ended. Enter a value between 10 and 300.
To generate an alarm output when an event is detected, select the Alarm Output check
box and select the alarm output(s) to be activated.
In the Alarm Delay field, enter the number of seconds that the system will continue to
generate an alarm output after the event has ended. Enter a value between 10 and 300.
Click Save to apply the settings.