Hartzell HC-82XF-1 Owner's Manual page 99

WARNING:
CAUTION:
(9) Align the mounting holes and dowel pins in the propeller
hub flange with the mounting holes and the dowel pin
holes in the engine flange.
CAUTION 1:
CAUTION 2:
(10) Slide the propeller flange onto the engine flange.
CAUTION:
(11) Install the mounting bolts (Table 3-1) with washers
through the engine flange from the engine side and into
the tapped holes in the propeller flange. Refer to Figures
3-2 and 3-3.
For propeller removals between overhaul
NOTE:
intervals, mounting bolts and washers may be
reused if they are not damaged or corroded.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
175
CLEANING AGENT MEK IS FLAMMABLE
AND TOXIC TO THE SKIN, EYES AND
RESPIRATORY TRACT. SKIN AND EYE
PROTECTION ARE REQUIRED. AVOID
PROLONGED CONTACT. USE IN A WELL
VENTILATED AREA.
USE CARE TO AVOID SCRAPING
ALUMINUM FROM THE BORE OF THE
SPINNER BULKHEAD. SCRAPINGS
COULD BECOME WEDGED BETWEEN
THE FLANGE SURFACES.
MAKE SURE THAT COMPLETE AND TRUE
SURFACE CONTACT IS ESTABLISHED
BETWEEN THE PROPELLER HUB
FLANGE AND THE ENGINE FLANGE.
USE CARE TO AVOID SCRAPING
ALUMINUM FROM THE BORE OF THE
SPINNER BULKHEAD. SCRAPINGS
COULD BECOME WEDGED BETWEEN
THE FLANGE SURFACES.
NEW PROPELLER MOUNTING BOLTS
MUST BE USED WHEN INITIALLY
INSTALLING A NEW OR OVERHAULED
PROPELLER.
61-00-75
Page 3-19
Dec/05