Hartzell HC-82XF-1 Owner's Manual page 97

WARNING:
CAUTION:
(8) With a suitable crane hoist and sling, carefully move the
propeller assembly to the aircraft engine mounting flange
in preparation for installation.
APS0212A
Standard Torque Wrench
(actual torque required) X (torque wrench length)
(torque wrench length) + (length of adapter)
EXAMPLE:
100 Ft-Lb (136 N•m) x 1 ft (304.8 mm)
1 ft (304.8 mm) + 0.25 foot (76.2 mm)
Determining Torque Value When Using Torquing Adapter
INSTALLATION AND REMOVAL
Propeller Owner's Manual
175
MAKE SURE THE SLING IS RATED UP TO
800 POUNDS (363 KG) TO SUPPORT THE
WEIGHT OF THE PROPELLER ASSEMBLY
DURING INSTALLATION.
WHEN INSTALLING THE PROPELLER
ON THE AIRCRAFT, DO NOT DAMAGE
THE ICE PROTECTION SYSTEM
COMPONENTS, IF APPLICABLE.
1.00 foot
(304.8 mm)
80 Ft-Lb
=
(108 N•m)
Figure 3-4
Torquing Adapter
0.25 foot
(76.2 mm)
Torque wrench reading
= to achieve required actual
torque
reading on torque
wrench with 3-inch
<
(76.2 mm) adapter for
actual torque of 100
Ft-Lb (136 N•m)
61-00-75
Page 3-17
Rev. 1 Jun/11