Hartzell HC-82XF-1 Owner's Manual page 143

(29) Install the spinner dome as follows:
CAUTION 1:
CAUTION 2:
NOTE:
(a) Carefully slide the spinner dome over the installed
propeller.
(b) Secure the spinner dome to the spinner bulkhead
with the supplied screws and washers.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
175
TO PREVENT DAMAGE TO THE
BLADE AND BLADE PAINT, WRAP THE
BLADE SHANKS IN SEVERAL LAYERS
OF MASKING OR DUCT TAPE
BEFORE INSTALLING THE SPINNER
DOME. REMOVE THE TAPE AFTER
THE SPINNER IS INSTALLED.
THE SPINNER DOME WILL WOBBLE
IF NOT ALIGNED PROPERLY, AND
MAY AFFECT THE BALANCE OF THE
PROPELLER.
The following instructions relate to Hartzell
spinners only. In some cases, the airframe
manufacturer produced the spinner assembly.
In those cases, refer to the airframe
manufacturer's manual for spinner installation
instructions.
61-00-75
Page 3-63
Rev. 1 Jun/11