Hartzell HC-82XF-1 Owner's Manual page 165

(9) Remove four propeller mounting bolts and washers.
NOTE 1: Two of the propeller mounting bolts and
NOTE 2: For propeller removals between overhaul
CAUTION:
(10) Remove and discard the shaft O-ring.
(11) Remove the shim.
(12) Using the support sling, lift the propeller from the
mounting flange.
(13) If the spinner was manufactured by Hartzell Propeller:
(a) Do not remove the spinner adapter ring.
(b) Visually inspect the spinner adapter ring for cracks.
(c) If cracks are found in the spinner adapter ring,
remove it from the engine starter ring gear and
replace it.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
175
washers cannot be removed from the propeller
hub due to interference with other propeller
parts.
intervals, mounting bolts and washers may be
reused if they are not damaged or corroded.
USE ADEQUATE PRECAUTIONS TO
PROTECT THE PROPELLER ASSEMBLY
FROM DAMAGE WHEN IT IS REMOVED
FROM THE AIRCRAFT ENGINE AND
WHEN IT IS STORED.
61-00-75
Page 3-85
Rev. 1 Jun/11