Hartzell HC-82XF-1 Owner's Manual page 104

(6) Align the four mounting bolts (already installed in the
propeller hub flange) with the threaded bushings in the
engine flange.
NOTE:
W10298
TORQUE
If torque wrench adapter is used, use the calculation in
NOTE:
Table 3-1 to determine correct torque wrench setting.
Installing K or L Flange Propeller on the Engine Flange
INSTALLATION AND REMOVAL
Propeller Owner's Manual
Four of the propeller mounting bolts will
already be installed in the propeller flange.
Interference with other propeller parts requires
that the bolts be installed during propeller
assembly.
Mounting Bolt
Shim
Starter Ring Gear
Engine Flange
Figure 3-6
175
Propeller Flange
O-ring
Torque
Wrench
61-00-75
Torque Wrench
Adapter
Page 3-24
Dec/05