Hartzell HC-82XF-1 Owner's Manual page 161

CAUTION:
(5) Remove the propeller mounting bolts and washers.
NOTE:
CAUTION:
(6) Using the support sling, lift the propeller from the
mounting flange.
(7) Remove and discard the shaft O-ring.
(8) Put the propeller, with spinner bulkhead and start locks
attached, on a suitable cart for transportation.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
175
DISCARD THE PROPELLER MOUNTING
BOLTS AND WASHERS IF THEY ARE
DAMAGED OR CORRODED, OR IF
THE PROPELLER IS REMOVED FOR
OVERHAUL.
For propeller removals between overhaul
intervals, mounting bolts and washers may be
reused if they are not damaged or corroded.
USE ADEQUATE PRECAUTIONS TO
PROTECT THE PROPELLER ASSEMBLY
FROM DAMAGE WHEN IT IS REMOVED
FROM THE AIRCRAFT ENGINE AND
WHEN IT IS STORED.
61-00-75
Page 3-81
Rev. 1 Jun/11