Hartzell HC-82XF-1 Owner's Manual page 155

WARNING:
(3) Support the propeller assembly with a sling.
NOTE 1: To permit rotation of the propeller for ease of
NOTE 2: If the propeller will be reinstalled, and it
CAUTION:
(4) Remove the propeller mounting bolts from the engine
flange.
NOTE:
CAUTION:
(5) Using the support sling, lift the propeller from the
mounting flange.
(6) Remove and discard the engine shaft O-ring.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
175
MAKE SURE THE SLING IS RATED UP TO
800 POUNDS (363 KG.) TO SUPPORT THE
WEIGHT OF THE PROPELLER ASSEMBLY
DURING REMOVAL.
bolt removal, supporting the propeller with a
sling may be delayed until all but two mounting
bolts and washers have been removed.
has been dynamically balanced, make
an identifying mark (with a felt-tipped pen
only) on the propeller hub and a matching
mark on the engine flange to make sure of
proper positioning of the propeller during
reinstallation. This will prevent dynamic
imbalance.
DISCARD THE PROPELLER MOUNTING
BOLTS AND WASHERS IF THEY ARE
DAMAGED OR CORRODED, OR IF
THE PROPELLER IS REMOVED FOR
OVERHAUL.
For propeller removals between overhaul
intervals, mounting bolts and washers may be
reused if they are not damaged or corroded.
USE ADEQUATE PRECAUTIONS TO
PROTECT THE PROPELLER ASSEMBLY
FROM DAMAGE WHEN IT IS REMOVED
FROM THE AIRCRAFT ENGINE AND
WHEN IT IS STORED.
61-00-75
Page 3-75
Rev. 1 Jun/11