Pressure Feedback Input - Bosch rexroth Sytronix FcP 5020 Quick Start Manual

Bosch Rexroth AG
Block Diagram of Main Functions

7.4 Pressure Feedback Input

AI2 input is predefined as the pressure sensor input. User can select a different
type of pressure sensor and scaling factor. In case of Rexroth HM20 pressure
sensor is used the parameter F2.10 use for setting the installed HM20 pressure
sensor.
Fig. 7-6: Pressure feedback input
Code
Pressure feedback corresponding to 5V,
F2.06
10V or 20mA
F2.07 Pressure feedback null offset in V or mA 0.0...5.0 V, mA
F3.02 Filter time for pressure feedback
Tab. 7-3: Parameter list of pressure sensor feedback scaling
F2.06, F2.07: Scaling for pressure sensor feedback
Fig. 7-7: Pressure sensor feedback scaling
24/83
Name Setting range Default
0.1...1,000.0 bar 100.0
(mA)
0...999 ms
DOK-RCON03-FCP5020****-QU04-EN-P
FcP 5020
Min. Attri.
0.1 Stop
4.0
0.1 Stop
4 1 Run