Bosch rexroth Sytronix FcP 5020 Quick Start Manual page 27

FcP 5020
Code
F2.00 Analog input AI1
F2.01 Analog input AI2
External analog input EAI (-10V...10V,
F2.02
4...20mA)
External analog input EAI2 (-10V...
F2.03
10V, 4...20mA)
Pressure command corresponding to
F2.04
5V, 10V or 20mA
Pressure command null offset in V or
F2.05
mA
F3.10 Filter time for pressure ascending [0]
F3.11 Filter time for pressure descending [0] 0...999 ms
F4.00 Protection function configuration word
F4.20 p/Q command soft start delay
F4.21 Minimum pressure command limit
F4.22 Maximum pressure command limit
Tab. 7-2: Parameter list of pressure command processing
The setting is equally applicable to another parameter group related
to filter time for pressure command ascending and descending, i.e.
F3.30, F3.31.
F2.04, F2.05: Scaling for pressure command
Fig. 7-5: Pressure command scaling
DOK-RCON03-FCP5020****-QU04-EN-P
Name
Block Diagram of Main Functions
Setting range
0: No function assigned from
ASF
1: Pressure command
2: Pressure feedback
3: Flow command
4: Oxygen feedback (for my-
Cro)
0.1...1,000.0 bar
0.0...5.0 V, mA
0...999 ms
0...15
Bit0: Pressure sensor failure
(PSF)
Bit1: Actual pressure moni-
toring
Bit2: p/Q max. command
limit
Bit3: Oil changing detection
0.0...1,000.0 s
0.0...[F4.22] bar
[F4.21]...1,000.0 bar
Bosch Rexroth AG
Default Min. Attri.
0 - Stop
2 - Stop
0 - Stop
0 - Stop
10.0 0.1 Stop
0.0 0.1 Stop
80 1 Run
40 1 Run
0 - Run
0.0 0.1 Stop
5.0 0.1 Stop
250.0 0.1 Stop
23/83