Bosch rexroth Sytronix FcP 5020 Quick Start Manual page 10

Bosch Rexroth AG
Function Specification
* Supported communication protocols: Profibus, CANopen, SercosIII, Multi-
Ethernet, Modbus.
Pressure signal feedback
●
– Compatible with different types of pressure sensors (unlimited scaling for
the analog input signal)
– High resistance capability to electromagnetic interference (with the use of
high precision digital filter device for signal filtering)
– Quick configuration for Rexroth HM20 pressure sensor
Quick configuration for Rexroth MOT-FC_HOY motor
●
p/Q PID control
●
– p/Q control with automatic switching between pressure and flow control
modes
– Flow control
– Pressure control
– With 2 groups of switchable parameters provided
Restore ASF parameter
●
Extension functions
●
– Master / slave control
– Sleep / wake function
– Two points / double pump control
– Pressure drop / overshoot compensation
– Pump power limitation
– Hydraulic soft start and separate acceleration ramp
Protection function
●
– Pressure sensor failure detection
– Actual pressure monitoring
– Oil change warning / error
– Pressure and flow command limit
– Pump thermal protection
– Sensor monitoring
CytroPac configuration*
●
– Load CytroPac configuration
– CytroPac sensor monitoring
– LED flash showing converter status
* CytroPac and myCro are specified compact Sytronix systems with sen-
sors. Both apply FcP 5020 application software.
6/83
DOK-RCON03-FCP5020****-QU04-EN-P
FcP 5020