7 Installation
Connecting the communication card
7.6.3.3 Wiring for multiple inverters
Data logger
72
...
1. On the cable coming from the data logger: Connect the
2. Depending on the RS485 connection diagram (see
DATA+ wire to terminal 5 and the DATA– wire to terminal
6.
On the cable going to the second inverter: Connect the
DATA+ wire to terminal 3 and the DATA– wire to terminal
4.
"RS485 connection diagram for multiple inverters",
page 69), switch the DIP switch for the RS485 termina-
tion resistor on or off.
Installation and operation manual M70A_260 Flex RPI703M26000 EU V1.1 EN 2022-08-02