Settings You Can Configure Using Web Image Monitor - Ricoh Pro C9100 Operating Instructions Manual

Tab
Administrator
Tools
Administrator
Tools
Administrator
Tools
Administrator
Tools
• The SNMP setting can be specified in [SNMP] under [Configuration] in Web Image Monitor.

Settings You Can Configure Using Web Image Monitor

Use Web Image Monitor to configure the security settings shown in the following table.
Device Management Configuration
Category
Device Settings Collect Job Logs
Logs
Device Settings Collect Access Logs
Logs
Item
Extended Security
Password Policy
Network Security Level
Service Mode Lock
Machine Data Encryption
Settings
Item
Additional Information for Enhanced Security
Setting
"Complexity Setting": Level 1 or higher,
"Minimum Character No.": 8 or higher
See page 162 "Specifying the Extended
Security Functions".
Level 2
To acquire the machine status through printer
driver or Web Image Monitor, enable "SNMP"
on Web Image Monitor.
See page 77 "Specifying Network Security
Levels".
On
See page 169 "Restricting a Customer
Engineer Operation".
Select [Encrypt], and then select [All Data] for
"Carry over all data or file system data only
(without formatting), or format all data.".
If [Encrypt] has already been selected, further
encryption settings are not necessary.
See page 55 "Encrypting Data on the
Machine".
Setting
Active
Active
171