Ricoh Pro C9100 Operating Instructions Manual page 136

6. Managing the Machine
Attribute
Encryption Key Auto
Exchange: Setting1-4, Default:
Security Level
Encryption Key Auto
Exchange: Setting1-4, Default:
Authentication Method
WIM Auto Logout Timer
(minutes)
Update Firmware
Change Firmware Structure
Firmware Update Start
Destination Server Name
Indicates the name of the server from which the data export or import request was issued when the
log type is for importing or exporting preference information.
HDD Format Partition
Indicates the reason for formatting the hard disk.
HDD Exchange
Problem with HDD Encryption
Key
Problem with Disk Label
134
The security level is recorded.
When [Authentication Only] is selected, "Authentication Only"
is recorded.
When [Authentication and Low Level Encryption] is selected,
"Authentication and Low Level Encryption" is recorded.
When [Authentication and High Level Encryption] is selected,
"Authentication and High Level Encryption" is recorded.
When [User Settings] is selected, "User Settings" is recorded.
The authentication method used for the auto key exchange
format is recorded. Either "PSK" or "Certificate" is recorded.
Web Image Monitor's auto logout timer log is recorded in
increments of one minute.
A log entry reporting changes to the [Update Firmware] setting
is recorded.
"Prohibit" or "Do not Prohibit" is recorded.
A log entry reporting changes to the [Change Firmware
Structure] setting is recorded.
"Prohibit" or "Do not Prohibit" is recorded.
A log entry reporting firmware update is recorded.
Value
The hard disk has been replaced.
There is a problem with the hard disk encryption key.
The disk label cannot be read.
Description
Content