Ricoh Pro C9100 Operating Instructions Manual page 132

6. Managing the Machine
Communication Start Request
Receiver (In)
Communication Start Request
Sender (Out)
Communication Start Log ID
Indicates the log ID for the communication start time.
This is a hexadecimal ID that indicates the time at which the communication started.
Communication Start/End
Indicates the times at which the communication started and ended.
Network Attack Status
Indicates the machine's status when network attacks occur.
Violation Detected
Recovered from Violation
Max. Host Capacity Reached
Recovered from Max. Host
Capacity
Network Attack Type
Identifies network attack types.
Password Entry Violation
Device Access Violation
Request Falsification Violation
Network Attack Type Details
Indicates details of network attack types.
130
Value
The machine received a request to start communication.
The machine sent a request to start communication.
Value
An attack on the network was detected.
The network recovered from an attack.
The machine became inoperable due to the volume of
incoming data reaching the maximum host capacity.
The machine became operable again following reduction of
the volume of incoming data.
Value
Password cracking
Denial-of-Service attack (DoS)
Request forgery
Content
Content
Content