Snmpv3 Encryption - Ricoh Pro C9100 Operating Instructions Manual

5. Enhanced Network Security

SNMPv3 Encryption

When using Device Manager NX or another application that communicates via SNMPv3, you can
encrypt the transmitted data.
By making this setting, you can protect data from being tampered with.
1. Log in as the network administrator from the control panel.
2. Press [System Settings].
3. Press [Interface Settings].
4. Press [ Next].
5. Press [Permit SNMPv3 Communication].
6. Press [Encryption Only].
7. Press [OK].
8. Log out.
• To use Device Manager NX for encrypting the data for specifying settings, you need to specify the
network administrator's [Encryption Password] setting and [Encrypted Password] in [SNMP
Account Setting] in Device Manager NX, in addition to specifying [Permit SNMPv3
Communication] on the machine. For details about specifying [Encrypted Password] in Device
Manager NX, see Device Manager NX Help.
• If network administrator's [Encryption Password] setting is not specified, the data for transmission
may not be encrypted or sent. For details about specifying the network administrator's [Encryption
Password] setting, see page 14 "Registering and Changing Administrators".
112