6. Managing the Machine
Detected Power
The power consumption status of the machine is measured and registered in the log while the
machine is being used.
Controller Standby
STR
Main Power Off
Printing
Engine Standby
Engine Low
Engine Night
Engine Total
Fusing Unit Off
Power Consumption(Wh)
Indicates the power consumption in each power state.
Specifying Log Collect Settings
Enable the collection settings for each kind of log and configure the collection level.
Job Log Collect Level
If "Job Log Collect Level" is set to [Level 1], all job logs are collected.
Access Log Collect Level
If "Access Log Collect Level" is set to [Level 1], the following items are recorded in the access log:
• HDD Format
• All Logs Deletion
• Log Setting Change
• Log Collection Item Change
If "Access Log Collect Level" is set to [Level 2], all access logs are collected.
Eco-friendly Log Collect Level
If "Eco-friendly Log Collect Level" is set to [Level 1], eco-friendly logs are not collected.
138
Value
Controller standby mode
Suspend to RAM (STR) mode
The main power is turned off.
Machine's printing status
Engine's standby status
Engine's low-power status
Engine's silent status
Machine's total electricity consumption
Fusing unit off status
Content