Miele H 7890 BP Operating And Installation Instructions page 9


For safety reasons, the oven may only be used when it has been
fully installed.

This oven must not be installed and operated in mobile
installations (e.g. on a ship).

Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
appliance malfunctions.
Do not open the oven housing under any circumstances.

The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.

Miele can only guarantee the safety of the appliance when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.

If the oven is delivered without a mains connection cable, a
special cable must be installed by a suitably qualified and competent
person (see "Installation - Electrical connection").

If the mains connection cable is damaged, it must be replaced
with a special connection cable by a suitably qualified and
competent person (see "Installation - Electrical connection").

During installation, maintenance and repair work, the oven must
be completely disconnected from the mains electricity supply. To
ensure this:
- Switch off the mains circuit breaker, or
- switch off at the wall socket and withdraw the plug. To do this,
pull the plug and not the mains connection cable.

The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g. by heat insulation strips fitted in the housing unit).
Furthermore, the required supply of cool air must not be excessively
heated by other heat sources (e.g. solid fuel stoves).
Warning and safety instructions
9