Remote Control; Activating Mobilestart; Supervision - Miele H 7890 BP Operating And Installation Instructions

- Reset
This setting is only visible if a Wi-Fi
network has already been set up. The
Wi-Fi function is deactivated and the
Wi-Fi network will be reset to the
factory default. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.
The network settings should be reset
whenever the oven is being disposed
of or sold, or if a used oven is being
put into operation. This is the only
way to ensure that all personal data
has been removed and, in the case of
the latter, the previous owner will no
longer be able to access the oven.
-
Set up
This setting is only visible if no
connection to the Wi-Fi network has
been set up yet. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.

Remote control

If you have installed the Miele App on
your mobile device, have access to the
Miele@home system and have activated
the remote control function (
use the MobileStart function to retrieve
information on oven cooking programmes
currently in progress or to end a
programme in progress.

Activating MobileStart

 Select the  sensor to activate
MobileStart.
The  sensor lights up. You can
operate your oven remotely with the
Miele App.
Directly operating the oven takes
priority over operating it via the remote
control function on the App.
You can use MobileStart as long as
the  sensor is lit up.

SuperVision

The oven is a Miele@home compatible
appliance with
for monitoring other household
appliances in the Miele@home system.
The
activated until the Miele@home system
has been set up.
SuperVision display
-
-
Display standby
The
available when the oven is in standby.
On ), you can
However, the time of day display must
be switched on (
Display
-
-
SuperVision
SuperVision function cannot be
On
The function is switched on.
SuperVision
The  symbol will appear in the top
right-hand corner of the display.
Off
The function is switched off.
SuperVision
SuperVision function is also
Settings
| On ).
On
Active domestic appliances that are
signed on to the Miele@home system
are always displayed.
Only if there is a fault
Only faults on active domestic
appliances are displayed.
Settings
functionality
| |
Time
43