Activating And Configuring A Timer Programme For Cooling; Changing The Room Temperature Temporarily; Domestic Hot Water Temperature; Selecting The Operating Mode - DeDietrich HPI S Series User Manual

Fig.5
14 : 23 Zo.. Zone setup: ... Heating Schedule
Monday
6:00 Comfort 20.0°C
22.00 Reduce 16.00°C
Edit schedule entry
6:00 Comfort 20.0°C
Add time and Activity
Copy to other day
Set activity temperatures
4.8.3

Activating and configuring a timer programme for cooling

Fig.6
14 : 23
Zo.. Zone setup: ... Cooling Schedule
Monday
20.0°C
6:00 Comfort
22.00
Reduce 16.00°C
Edit schedule entry
6:00 Comfort 20.0°C
Add time and Activity
Copy to other day
Set activity temperatures
4.8.4

Changing the room temperature temporarily

4.9

Domestic hot water temperature

4.9.1

Selecting the operating mode

7684505 - v04 - 10022022
4. To modify the timer programme, select Zone configuration > Heating
Schedule.
5. Select the programme to be modified.
The programmed activities for Monday are displayed.
The last activity of the day remains active until the first activity of the
following day.
6. Select the day to be modified.
7. Carry out the following actions according to your needs:
Modify the timings for programmed activities.
Add a new time range.
MW-5000770-04
Delete a programmed activity (choose the activity "Delete").
Copy programmed daily activities to other days.
Modify temperatures linked to an activity.
You can modify the timer programme linked to the Cooling mode. In the
Scheduling operating mode, the Cooling timer programme is activated
automatically when the average outdoor temperature over a 24-hour
period has been greater than 22 °C. If you would prefer that this mode is
triggered at a different temperature, ask your installer to modify this
parameter in your installation.
1. Select the icon for the zone to be programmed,
Off
Information on the current operating mode is given in the upper part
of the screen.
2. To modify the timer programme for the Cooling mode, select Zone
configuration > Cooling Schedule.
The programmed activities for Monday are displayed.
The last activity of the day remains active until the first activity of the
following day.
3. Select the day to be modified.
4. Carry out the following actions according to your needs:
Modify the timings for programmed activities.
Add a new activity.
Delete a programmed activity (choose the activity "Delete").
MW-1001267-04
Copy programmed daily activities to other days.
Modify temperatures linked to an activity.
Regardless of the operating mode selected for a zone, it is possible to
modify the room temperature for a defined period. Once this time has
elapsed, the selected operating mode will restart.
1. Select the icon of the zone to be modified,
Off
2. Select Short temperature change.
3. Define the duration in Hour and in Minute.
4. Set the temporary room temperature setpoint for the circuit selected.
For the production of domestic hot water, you can choose between five
operating modes. We recommend the Scheduling mode which enables
domestic hot water production periods to be programmed according to
your needs and to optimise your energy consumption.
1. Select the
Off
DHW tank icon.
4 Operation
, for example.
, for example.
MIT-S 19