Setting The Domestic Hot Water Temperature; Activating Forcing Of The Cooling Function - DeDietrich ALEZIO O HYBRID User Manual

Fig.41
Fig.42
MW-5000401-2
Fig.43
MW-5000402-2
Fig.44
MW-5000403-2
7613346 - v05 - 13112018
6.2.3
1. Access the domestic hot water production parameters by pressing the
2. Modify the domestic hot water set point by pressing the
MW-6000254-2
3. Confirm the new temperature set point by pressing the
6.2.4
1. Access Forcing of the cooling function by pressing the
2. Open Forcing of the cooling function by pressing the
3. Activate Forcing of the cooling function by pressing the

Setting the domestic hot water temperature

Important
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
key .
Important

Press the key to cancel all input.
Go back to the main display by pressing the

Activating Forcing of the cooling function

Important
The cooling function can be managed via the PROG COOL sub-
menu dedicated to timer programming.
Important
The flow temperature set point for the cooling mode corresponds
to the parameters
type of circuit configured (underfloor heating, convection fan). The
parameters
Installer menu.
Important
Forcing of the cooling function is possible only if the Installer
enabled the cooling function during Installation.

key.
or depending on the
or are available in the
200 ESL HYBRID
6 Settings
or key.
key.
key.
key.
key.
39