Setting The Domestic Hot Water Temperature; Activating Forcing Of The Cooling Function - DeDietrich ALEZIO EVOLUTION EASYLIFE AWHP-V200 Series User Manual

6 Settings
Fig.35
MW-3000249-4
Fig.36
Fig.37
MW-5000401-2
40 MIV-4
6.2.3
MW-6000254-2
6.2.4
3. Confirm by pressing the
The name of the circuit and the heating water temperature set
point are displayed alternately.
4. Access setting of the heating water temperature set point by press­
ing the key.
5. Set the heating water temperature set point by pressing the
key.
6. Confirm the new temperature set point by pressing the
Note

Press the key to cancel all input.
Note
The setting for the room temperature set point in comfort mode
can also be accessed in the User menu, parameter

Setting the domestic hot water temperature

Note
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
1. Access the domestic hot water production parameters by pressing
the key .
2. Modify the domestic hot water set point by pressing the
Note

Press the key to cancel all input.
3. Confirm the new temperature set point by pressing the
Go back to the main display by pressing the

Activating Forcing of the cooling function

Note
The cooling function can be managed via the PROG COOL sub-
menu dedicated to timer programming.
Note
The flow temperature set point for the cooling mode corresponds
to the parameters
type of circuit configured (underfloor heating, convection fan). The
parameters
staller menu.
1. Access Forcing of the cooling function by pressing the
Important
Forcing of the cooling function is possible only if the Installer ena­
bled the cooling function during Installation.
key.

key.
or depending on the
or are available in the In­
7623755 - v05 - 27042017
or
key.
.
or key.
key.
key.