Setting The Domestic Hot Water Temperature; Activating Forcing Of The Cooling Function - DeDietrich EASYLIFE ALEZIO O HYBRID User Manual

6 Settings
Fig.34
MW-3000249-4
Fig.35
Fig.36
MW-5000401-2
40 200 ESL HYBRID
3. Confirm by pressing the
4. Access setting of the heating water temperature set point by pressing
5. Set the heating water temperature set point by pressing the
6. Confirm the new temperature set point by pressing the
6.3.2
1. Access the domestic hot water production parameters by pressing the
2. Modify the domestic hot water temperature set point by pressing the
MW-6000254-2
3. Confirm the new temperature set point by pressing the
6.3.3
The cooling function can be managed via the PROG COOL sub-menu
dedicated to timer programming.
The set point flow temperature for cooling mode corresponds to the
CP270 parameter for underfloor heating and CP280 for a convection fan.
The CP270 and CP280 parameters can be accessed by the Installer.
1. Access Forcing of the cooling function by pressing the
The name of the circuit and the heating water temperature set point
are displayed alternately.
the key.
key.
Important

Press the key to cancel all inputs.

Setting the domestic hot water temperature

Important
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
key.
or key.
Important

Press the key to cancel all input.
Go back to the main display by pressing the

Activating Forcing of the cooling function

Important
The heat pump switches to cooling automatically when the
outdoor temperature is +2 °C greater than the summer/winter
switching set point temperature (22 °C). The forced cooling
function is used to have cooling regardless of the outdoor
temperature.
Important
Forcing of the cooling function is possible only if the Installer
enabled the cooling function during Installation.
key.

key.
7613346 - v06 - 02072019
or
key.
key.
key.