Laser Safety - HP StorageWorks SAN Switch 2/32 Installation Manual

Laser Safety

A. Certification and Classification Information
When equipped with native Fibre Channel adapters, this product contains a laser
internal to the small form factor pluggable (SFP) transceiver modules.
In the USA, the SFP module is certified as a Class 1 Laser product, conforming to the
requirements contained in Department Of Health and Human Services (DHHS)
regulation 21 CFR, Subchapter J. The certification is indicated by a label on the metal
SFP housing.
Outside the USA, the SFP is certified as a Class 1 Laser product conforming to
requirements contained in IEC 825-1:1993 and EN60825-1:1994, including
Amendment 11:1996.
The SFP includes the following certifications:
• UL Recognized Component (USA)
• CSA Certified Component (Canada)
• TUV Certified Component (European Union)
• CB Certificate (Worldwide)
B. Product Information
Each communications port consists of a transmitter and receiver optical subassembly.
The transmitter subassembly contains internally a semiconductor laser diode in the
wavelength of either 850 nanometers (shortwave laser) or 1310 nanometers (longwave
laser).
Class 1 Laser products are not considered hazardous.
WARNING: There are no user maintenance operations, service operations, or
adjustments to be performed on the SFP module.
C. Usage Restrictions
Failure to comply with these usage restrictions may result in incorrect operation of the
system and points of access may emit laser radiation above the Class 1 limits
established by the IEC and U.S. DHHS.
SAN switch 2/32 version 4.0.x installation guide
Regulatory Compliance Notices
C–3 C–3