Applying Power; Selecting A Source; Complete Guide To Your Entré Entertainment Hub, Ver - Kenwood Sovereign Entre User Manual

Getting to Know Your Entré Entertainment Hub

Applying Power

Entré is always in one of four power states:
State: Meaning:
Power Off: No Entré is
lights appear on unplugged.
Entré's display
panel.
Initializing: The Entré's high-
Standby Indicator capacity music
light is blinking. storage system is
initializing.
Standby: The Entré is plugged
Standby Indicator in, but not in use.
light is solid red.
Power On: The Entré is powered
display panel and running.
shows text and the
Standby Indicator
goes off.

Selecting a Source

Once the system is powered on, press
can also program the Entré remote to control your TV, digital satellite tuner,
and cable box, independent of operating Entré. For more information about
programming the remote, see "Entering Product Codes" on page 10.
If you press any of the other control buttons (TV, DSS, CBL),
you must press
MR
40 Complete Guide to Your Entré Entertainment Hub, ver. 2.0
Action:
1. Plug Entré in.
2. Press on the remote,
or on Entré's front
panel after the Standby
Indicator stops flashing.
Wait until the light stops blink-
ing, then press on the
remote,
or on Entré's front panel.
Press on the remote, or
on Entré's front panel to
begin using the system.
Press on the remote, or
on Entré's front panel to
return the system to standby.
- on the remote to use Entré. You
MR H1
- 1 again before you can control Entré.
H