Before You Begin; Connecting To Power; What Do You Want To Do Next - Kenwood Sovereign Entre User Manual

How Do I Connect to My Kenwood Sovereign DVD or CD Changer (with a Sovereign Receiver)?, continued
Entré can control the following Kenwood DVD and CD changers:
• DVD: DV-5900M (shown in illustration), DV-5050M
• CD: CD-425M
If you do not have one of these changers, Entré cannot play any DVDs or CDs
loaded in it.

Before You Begin

Connect your TV and receiver to Entré. For more information, see the
connection instructions on pages 2 through 5.
If you are using Entré with a Kenwood Sovereign DVD
changer and a non-Kenwood Sovereign receiver, follow the
connection instructions on pages 8–9.
1. Connect the included RS-232C cable from the DVD or CD changer's
RS-232C jack to Entré's RS-232C to CD/DVD Changer jack as shown.
If you substitute a commercially-available RS-232C cable,
make sure it has female connections on both ends.
2. Connect the changer and receiver using the following cables (from left to
right on your changer):
From this changer
Connect this cable... jack...
optical digital cable or Digital Optical Out or
coaxial digital cable Digital Coaxial Out
Remove the protective cover from the optical jack before
connecting. Store it in a safe place.
mini cable DVD Control
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
How Do I Connect to My Kenwood Sovereign DVD or CD Changer (with a Sovereign Receiver)?, continued
Connect this cable...
analog audio
video cable
3. You can connect up to three Kenwood Sovereign DVD changers together in
To this Kenwood

Connecting to Power

Sovereign receiver
jack (not shown)...
DVD Digital In

What Do You Want to Do Next?

Set up my remote and being using Entré
Find a service provider and connect to the Internet
IR Repeater Out/
DVD control
From this changer
jack...
Mix Line Output or
6-Channel Output
If your system does not have surround sound (left and right
speakers only) use Mix Line Output on the changer and the
Front audio jacks on the receiver.
Video Output
You do not need to use the same type of video connection
as you used between the TV and Entré and your receiver.
Your Sovereign receiver handles video channel splitting.
a chain. If you have done so, set the Main/Sub switch on the one con-
nected to Entré to Main. Entrés with version 2.0.0.6 software and higher
can control all three changers.
For more information on chaining your changers, refer to the manual that
came with your changer.
Do not plug in Entré or components to AC power until you
have connected all your devices.
To this Kenwood
Sovereign receiver
jack (not shown)...
DVD/6-Channel
Audio In
DVD Video In
page 10
page 17
7