How Do I Use My Powertouch Iii Controller With Entré; How Do I Identify Entré To The Powertouch; Finding The Entré Main Menu On Powertouch Iii - Kenwood Sovereign Entre User Manual

Setting Up and Configuring Your Entré
How Do I Use My PowerTouch III Controller with Entré?
If you are using a Kenwood PowerTouch III controller, which is standard with
the VR-5900 receiver, or available as an option for other Kenwood Sovereign
receivers, use it to control all of Entré's features. This gives you command of
your entire home entertainment system from a single controller.
How Do I Identify Entré to the PowerTouch?
To determine if your PowerTouch III is ready to control Entré:
1. Touch PowerTouch III's
SETUP
2. Touch .
IR
3. Touch . When the list of inputs pops up, select
INPUT
4. Touch .
DEVICE
If Entré appears on the list of devices, select it and touch
Touch III is now ready to control Entré.
If Entré does not appear on the list of devices in Step 4, call our Customer
Service department at 1-800-KENWOOD to upgrade your PowerTouch III
for Entré.
First-generation PowerTouch III controllers do not have Entré
control built in and must have their software upgraded in
order to control Entré.
12
button.
- .
CD R
. Your Power-
ENTER
Finding the Entré Main Menu on PowerTouch III
1. Press PowerTouch III's HOME 1 page.
2. Press the . The Entré main screen appears:
ENTRÉ
For more information on using the PowerTouch to control Entré, see "How Do I
Use My PowerTouch III Controller with Entré?" on page 52.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0