Switching Media Modes - Kenwood Sovereign Entre User Manual

Press this button: To:
Turn the Entré Guide screen off. The TV then shows
PASS THROUGH
whatever video source is selected on the connected
receiver.
For future capabilities.
EMAIL
For future capabilities.
WEB LAST CH.
Change the TV, cable tuner, or DSS input (when the
INPUT SEL.
remote is in the TV, cable, or DSS control mode,
respectively).
Program the remote to control your TV, DSS tuner,
CODE SETUP
and cable tuner. For more information about pro-
gramming the remote, see "How Do I Set Up My
Remote?" on page 10 of "How to Connect and Set
Up Your Entré Entertainment Hub".
Activate the picture in a picture option (when the
PIP
remote is in the TV control mode). Please refer to
your TV's instructions for more information about its
capabilities.
Swap picture in a picture (when the remote is in the
PIP SWAP
TV control mode). Please refer to your TV's instruc-
tions for more information about its capabilities.
Switch to an alternate audio source (when the
ALT.AUDIO
remote is in the TV or DSS control mode).

Switching Media Modes

Press , , or on the remote, or
choose a mode. When you select a new mode, the Guide screen for that
mode appears on your TV screen. See the appropriate chapter for more
information on using the media mode guides.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
How Do I Switch between Media Modes?
on Entré's front panel to
MODE
45