How Do I Connect To My Kenwood Sovereign Receiver Or Amplifier; Before You Begin; Connecting A Kenwood Sovereign Receiver; Connecting To Power - Kenwood Sovereign Entre User Manual

How Do I Connect to My Kenwood Sovereign Receiver or Amplifier?, continued
This section focuses on the connections from Entré to your Kenwood Sovereign
receiver. Please refer to your receiver's instructions for more detail about its
connection jacks and capabilities.
If you do not have a Kenwood Sovereign receiver, see "How Do I Connect to
My Kenwood Sovereign DVD Changer (with a Non-Kenwood Receiver)?" on
page 8,

Before You Begin

Connect your TV to Entré. For more information, see "How Do I Connect to My
TV?, continued" on page 3. Note the type of video connection you used—you
must use the same type to connect to your receiver.

Connecting a Kenwood Sovereign Receiver

Connect the following cables, starting from the bottom of the receiver:
Connect this cable...
analog audio
analog audio
If you don't use Entré's analog connections, you may not be
able to record certain types of media.
video (composite/S-video/
component, depending on
your TV connection)
RS-232C
If you substitute a commercially available RS-232C cable,
make sure that it has female connectors on both ends.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
From this Entré To this Sovereign
jack... receiver jack...
Analog Play Out CD-R Play In
Analog Rec In CD-R Rec Out
Video Input Monitor Out
RS232C To AV Ext Control RS-232C
Receiver
How Do I Connect to My Kenwood Sovereign Receiver or Amplifier?, continued
Connect this cable...
optical digital cable
optical digital cable or
coaxial digital cable
If you use the optical digital cable, be sure to remove the
protective cover from the optical jack before connecting.
Please retain the cover and store it in a safe place.
mini cable

Connecting to Power

Do not plug in Entré or components to AC power until you
have connected all your devices.
Do NOT plug Entré's power cord into the receiver's switched
accessory outlet. Plug Entré's power cord only into a wall
outlet that receives constant power.

What Do You Want to Do Next?

Connect my DVD changer
Set up my remote and being using Entré
Find a service provider and connect to the Internet
From this Entré To this Sovereign
jack... receiver jack...
Digital Optical Out CD-R (digital area)
Digital Optical (or Digital Out
Coaxial) In
IR Repeater In IR Repeater Out/
DVD control
page 7 or page 8
page 10
page 17
5