How Do I Power-Up Entré For The Very First Time - Kenwood Sovereign Entre User Manual

Setting Up and Configuring Your Entré
How Do I Power-Up Entré for the Very First Time?
After you have made all of the connections described earlier in this chapter,
plug Entré's power cord directly into a wall outlet that receives constant power.
Do not plug Entré into a receiver's switched accessory outlet
or other outlet that does not receive constant power (such as a
switched wall outlet). Consider purchasing an Uninterruptible
Power Supply (UPS), just as you would for your home
computer.
After you plug Entré's power cord into the wall outlet (or UPS), its Standby
indicator flashes. Wait for the indicator to stop flashing. Once the Standby
indicator remains constantly lit, press
24
to turn Entré on.
POWER
If you have connected Entré to a Sovereign DVD changer and want to listen to
CDs or watch DVDs, make sure the changer is turned on before you turn on
Entré. This enables Entré to see the connected changer, so you can choose to
listen to or watch the discs it contains.
If Entré does not turn on as expected, or your music or DVD selections do not
appear as you expect, use the information in this chapter to check the
connections you have made. In addition, review the information about your
specific concern in "Troubleshooting" on page 139.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0