How Do I Set Up My Kenwood LCD Remote to Control Entré?
You can use the remote included with your Kenwood Sovereign receiver to
control Entré. If your receiver came with a PowerTouch® touch-screen
controller, for information.
If your receiver came with an LCD screen-learning remote, you need to
program the remote to control Entré and teach the button commands from
Entré's remote into the receiver's remote.
There are three main steps:
1. Identify the LCD remote's TV2 input as the one with Entré connected to it
(CD-R). See "Step One: Identifying the Remote's TV2 Input as the Entré
Input", below.
2. Teach the Entré's button functions to the receiver's remote. See "Step Two:
Teaching the Entré Remote Button Functions to the Receiver Remote" on
page 14.
3. Control Entré using the receiver's remote.
Step One: Identifying the Remote's TV2 Input as the Entré
Input
1. Press
. The display shows:
TV
2. Press
. The display shows:
MENU
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
How Do I Set Up My Kenwood LCD Remote to Control Entré?
3. Press
. The display shows:
SETUP
4. Press
. The display shows:
ENTER
5. Press
repeatedly until the
display shows:
6. Press
. The display shows:
ENTER
13