How Do I Connect To My Kenwood Sovereign Dvd Changer (With A Non-Kenwood Receiver)?, Continued; Before You Begin; Connecting Entré To A Non-Sovereign Primary Receiver; Complete Guide To Your Entré Entertainment Hub, Ver. 2.0 - Kenwood Sovereign Entre User Manual

How Do I Connect to My Kenwood Sovereign DVD Changer (with a Non-Kenwood Receiver)?, continued

This section focuses on the connections from your Kenwood Sovereign DVD
changer and a non-Kenwood receiver to Entré. Please refer to your receiver and
DVD changer's instructions for more detail about their connection jacks and
capabilities.
Though the diagram on page 8 shows a DV-5900M DVD
changer, you can connect a DV-5050M changer to Entré as
well.

Before You Begin

Choose an input set for Entré and the DVD changer on your receiver. Examine
the illustration above for tips on choosing input sets. You need an optical digital
input, analog play (tape monitor) outputs, and analog record (tape monitor)
inputs.
You also need a separate set of inputs for DVD player's 6-channel analog output
(one that is different from the input set you choose for Entré's analog audio
output).
Connecting Entré to a non-Sovereign Primary Receiver
Follow these instructions to connect any non-Sovereign receiver to Entré.
including non-Sovereign Kenwood receivers.
Connect the following cables:
From this Entré
Connect this cable... jack...
analog audio Analog Play Out
analog audio Analog Rec In
If you don't use Entré's analog connections, you may not be
able to record certain types of media.
video (composite/S-video/ Video Input
component, depending on
your TV connection)
optical digital cable Digital Optical Out
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
How Do I Connect to My Kenwood Sovereign DVD Changer (with a Non-Kenwood Receiver)?, continued
Connect this cable...
optical digital cable or
coaxial digital cable
Connecting a Kenwood Sovereign DVD Changer to Entré
Connect the following cables:
Connect this cable...
coaxial digital cable
component video
RS-232C
Connecting Entré to a Non-Kenwood Receiver to a Kenwood
Sovereign DVD Changer
To this receiver Connect three stereo audio cables from the receiver's 6-CHANNEL ANALOG
jack... INPUT to the DVD changer's 6-CHANNEL ANALOG OUTPUT as shown.
Tape Monitor In
Tape Monitor Out

Connecting to Power

Monitor Out

What Do You Want to Do Next?

Digital Optical In Set up my remote and being using Entré
Find a service provider and connect to the Internet
From this Entré
jack...
Digital Optical (or
Coaxial) In
Remove the protective cover from the optical jack before
connecting. Store it in a safe place.
From this Entré
jack...
Digital Coaxial In
Component Video In
RS232C To CD/DVD
Changer
If you have a DV-5050M, also connect one stere0 audio cable
from the changer's MIX LINE OUTPUT to the receiver's DVD
analog input.
Do not plug in Entré or components to AC power until you
have connected all your devices.
To this receiver
jack...
Digital Optical Out
To this changer
jack...
Digital Coaxial Out
Video Out
RS-232C
page 10
page 17
9