Before Applying The Power; Safety Precautions - Kenwood VRS-5100 Instruction Manual

Before applying the power

Units are designed for operation as follows.
U.S.A. and Canada ........................................... AC 120 V only
Australia ........................................................... AC 240 V only
Europe and U.K. ............................................... AC 230 V only
China and Russia ............................................. AC 220 V only
Other countries .......... AC 110-120 / 220-240 V switchable*
* AC voltage selection
(except for the Europe and Australia)
The AC voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before connecting
the power cord to your AC outlet, make sure that the setting position
of this switch matches your line voltage. If not, it must be set to your
voltage in accordance with the following direction.
Move switch lever to match
your line voltage with a small
screwdriver or other pointed
tool.
DVD
SPEAKERS (6 – 16Ω)
SURR BACK CENTER REAR FRONT
/SW R L R L
AM
VIDEO2
GND
VIDEO1
FM
75Ω
ANTENNA
Note :
Our warranty does not cover damage caused by excessive line
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaner because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.

Safety precautions

WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO
PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
P R E S E N C E O F I M P O R T A N T O P E R A T I N G A N D
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
2 EN
AC voltage selector switch
VOLTAGE SELECTOR
AC220- AC110-
240V~ 120V~
SUB WOOFER
DVD
PRE
IN MONITOR
OUT VOLTAGE SELECTOR
OUT
SURR BACK VIDEO1 OPTICAL AC220- AC110-
240V~ 120V~
VIDEO2
IN
/L
R BS
VIDEO2
COAXIAL
VIDEO1
R L R L MONITOR DVD
IN OUT OUT IN OUT
AUDIO S VIDEO VIDEO DIGITAL IN
Caution : Read this page carefully to ensure safe
How to use this manual
This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information.
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor.
Since this receiver works with all of your audio and video components,
we will guide you in setting up your system to be as easy as possible.
Operations
Shows you how to operate the various functions available on the
receiver.
Remote Control
Shows you how to operate other components using the remote control,
as well as a detailed explanation of all remote control operations.
Additional Information
Shows you additional information such as "In case of difficulty"
(troubleshooting) and "Specifications".
DE-EMPHASIS
CHANNEL SPACE
75µs 50µs
AM10kHz AM9kHz
FM100kHz FM50kHz
AC 110-120V
/220-240V~
50/60Hz
W
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
• Power ON/OFF mode
• Input selector settings
• Volume level
• BASS, TREBLE level
• TONE ON/OFF
• Listen mode setting
• Speaker settings
• Distance setting
• Midnight mode setting
For the U.S.A.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment may cause
harmful interference to radio communications, if it is not installed and
used in accordance with the instructions. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– – Consult the dealer or an experienced radio / TV technician for help.
operation.
• Broadcast band
• Frequency setting
• Preset stations
• RDS AUTO MEMORY setting
(for the Europe only)
• ACTIVE EQ mode
• Each channel's level
• DIMMER setting