Before Applying Power; Safety Precautions - Kenwood DVR-8100 Instruction Manual

Hide thumbs Also See for DVR-8100:
Table of Contents

Advertisement

Before applying power

2
Caution : Read this page carefully to ensure safe operation.
Units are designed for operation as follows.
U.S.A. and Canada ................ AC 120 V only
Australia ................................ AC 240 V only
Europe and U.K. .................... AC 230 V only
For the United Kingdom
Factory fitted moulded mains plug
1. The mains plug contains a fuse. For replacement,
use only a 13-Amp ASTA-approved (BS 1362) fuse.
2. The fuse cover must be refitted when replacing
the fuse in the moulded plug.
3. Do not cut off the mains plug from this equip-
ment. If the plug fitted is not suitable for the power
points in your home or the cable is too short to reach
a power point, then obtain an appropriate safety
approved extension lead or adapter, or consult your
dealer.
If nonetheless the mains plug is cut off, remove the
fuse and dispose of the plug immediately, to avoid
a possible shock hazard by inadvertent.
IMPORTANT :
The wires in the mains lead are coloured in accor-
dancewith the following code:
Blue
: Neutral
Brown : Live
Do not connect those leads to the earth terminal of
a three-pin plug.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
RISK OF ELECTRIC SHOCK
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
The marking of products using lasers (For countries other than U.S.A., U.S.-Military and Canada)
CLASS 1
LASER PRODUCT
The marking this product has been clas-
sified as Class 1. It means that there is no
danger of hazardous radiation outside
the product.
Location: Back panel
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
DO NOT OPEN
CAUTION
VISIBLE LASER RADIATION
WHEN OPEN. DO NOT
STARE INTO BEAM.
Inside this laser product, a laser diode classi-
fied as Class 2 laser radiation is contained as
alerted by the internal caution label shown
above. Do not stare into beam.
Location: DVD laser pick-up unit cover inside
this product
China and Russia ................... AC 220 V only
Other countries ................... AC 220 - 240 V
Manufactured under license from Dolby Laboratories.
"DOLBY", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are trademarks of
Digital Theater Systems, Inc.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Inside this laser product, a laser diode classified as Class
3A laser radiation is contained as alerted by the internal
caution label shown above. Do not stare into beam or
view directly with optical instruments.
Location: CD laser pick-up unit cover inside this product
DVR-8100 (EN)
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN. DO NOT STARE
INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.

Advertisement

Table of Contents
loading

Table of Contents