Recording Music From Different Cds Onto A Single Cd - Kenwood Sovereign Entre User Manual

Managing Your Music
3. Select tracks:
• All tracks on the first Channel are marked for recording by default. To
deselect a track, highlight it and press
tracks on a disc, press
4. Press to start recording. The Music Record Progress screen appears
for the duration of the recording.
5. Entré temporarily stores the tracks onto its music storage system. While
recording, the display reads "CD READ" and shows the recording
progress.
When Entré is finished storing the tracks, the display asks you to insert a blank
CD-R, after which Entré will record the tracks onto the disc.
When Entré finishes recording, it ejects the CD.

Recording Music from Different CDs onto a Single CD

You can select any combination of tracks from CDs in a connected changer or
in Entré's CD drawer to record to a recordable CD. On Entré, this process is
called "Audio Mix CD."
1. Make sure you have a recordable disc of the appropriate type:
• If you are recording conventional CD audio music files to CD-R you
must use blank music discs, identified by the following logo:
• If you are recording MP3 files to CD-R you can also use blank music
discs, OR you can use blank data discs, which are identified by the
following logo:
Entré CANNOT use blank data discs to record conventional CD audio
music files.
90
The tracks record in the order shown.
If the CD doesn't have enough space to record the selected
tracks, a message asking you to deselect tracks appears
before Entré begins recording.
If the CD exactly fills the available space, Entré displays a
note that you cannot select additional tracks without using a
larger-capacity disc.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
.
. To select or deselect all