Kenwood Sovereign Entre User Manual page 159

• On Windows NT/2000/XP computers:
a Click Start and select Run.
b Type cmd and click OK or press
c At the command prompt, type ipconfig/all and press
a Scroll to the Ethernet adapter settings and write down the fol-
lowing information:
•
•
•
•
3. On the Entre, go to setup > internet configuration > primary TCP/IP
settings.
4. Enter the Gateway & Subnet Mask exactly as they appeared on the com-
puter (see step 2, above).
5. Calculate an IP address:
a. Enter the first three segments of the IP address you noted from the
computer in step 2. These segments identify the parts of your net-
work that are not unique to a particular computer or device (such as
Entré)—they must match the ones from your computer.
b. Use the following formula to calculate the last number (the "node):
+ Node Number from Computer
For example, there are four computers on your network, and the IP
address from the computer you checked is 192.168.0.105. The new
Entré node number would be as follows:
c. Enter the number you just calcuated in the fourth segment.
The Internet should now recognize Entré, which means you can download
music and movie information and access OpenGlobe's Internet features.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0
IP address
Gateway
DNS servers
Subnet mask
Total Number of Computers
New Node Number
.
ENTER
+ 5
4
+ 105
+ 5
114
Troubleshooting
ENTER
147