MacDon M1 Series Unloading And Assembly Instructions page 79

13. Secure DEF head interconnect harness (A) to DEF supply
module hose with cable ties (B).
14. Route round auxiliary power connector (B) (C40B) from
right platform to bracket on frame and secure with washer
and nut.
15. Connect C40B (B) to C40A (A), and secure harness to air
cleaner support pipe (pipe not shown) with large cable
tie (C).
16. Remove protective cap from fuel level sender connector (D)
and plug into chassis harness P220 (not shown).
17. Secure fuel level sender harness to auxiliary power harness
with cable tie (E).
215359
ASSEMBLING THE WINDROWER
Figure 3.79: Cable Tie Locations
Figure 3.80: Electrical Connections
69
A
B
B
A
B
E
D
C
Revision A