Driving
General Info
To access to the engine, it is necessary to raise the hood and the side housingr
A
Opening the hood
Opening the engine bonnet is hydraucally operated as follows
• Check the valve (1) is on the position B.
• Use the manually operated pump (2 )to lift and hold open the bonnet to the desired height.
Closing the hood
• Gradually turn the handle (1) to position A
÷
NOTE! The valve must remain in that position when the hood is closed.
Side housing
To remove the side housing first lift the upper housing.
• Pull the handles (1) to unlock it.
• Remove the side housing to access to the engine.
1
B
5 - Operation
1
55