Cab; Hours - Active Carbon Filter; Hours - Air Conditioning Compressor Belt - Hardi ALPHA evo EcoDrive TWIN FORCE Instruction Book

Table of Contents

6 - Maintenance

Cab

The cab is equipped with active carbon filter that purifies the air entering in the cab interior. It is fitted outside the cab at the

rear.

ATTENTION! Wearing a mask and protective goggles is recommended to avoid inhaling the dust and protecting the

eyes from it.

• Partially loosen the knurled screw on the right of the cab and

completely loosen the screw on the left side (1).

• Remove the housing and active carbon filter assembly.

• Remove the filter from its housing by removing the 2 screws (2)

using a Philips screwdriver.

• Fit the new active carbon filter respecting the direction of

assembly. (The foam (3) is visible).

• Refit the assembly to the cab.

WARNING! The frequency of replacement is given for information purposes. However, if odours appear in the cockpit,

this means that it is no longer completely effective, and it must be replaced as soon as possible.

The wear and tension of the compressor drive should be checked regulary.

• Loosen the nut (1).

• Screw the nut (2) to retain the belt, then tighten the counter nut (1).

108

Table of Contents