Hardi ALPHA evo EcoDrive TWIN FORCE Instruction Book page 99

Table of Contents

Advertisement

• Press the keys
• Press the keys
• Wait a few moments to exit the temperature settings .
Adjust the ventilation
Ventilation runs regardless of the air conditioning system The ventilation has 6 speeds controlled manually
an automatic mode
• Press the key
• Press the keys
ventilation
÷
The ventilation starts always in the automatique mode
Air conditioning and heating controls
Principle of operation of the air conditioning :
• If the outer temperature is below 5 ° C, the cooling of the cabin will not be running.
• If the outer temperature is higher than 5 ° C, refrigeration will engage automatically when the ambient temperature
becomes higher than the setpoint temperature. Refrigeration will stop automatically when the ambient temperature
drops below the set temperature, or the outer temperature drops below 5 ° C.
÷
A timer prevents the restart or shutdown of the air conditioning compressor too frequently between two cycles.
Principle of operation of the heating
The heater will turn on when the ambient temperature drops below the setpoint temperature and stop when the ambient
temperature reaches the setpoint temperature.
Demisting control
Demisting is operated manually and stopped automatically after a time defined by the parameter
• Press the key
simultaneously and the ventilation is maximum in the cab.
• Press the key
, then
The indicator (2) remains light up during the demisting cycling of the
cab. It flashes 2 times at the end of the cycling demisting of the
windscreens
÷
If an another demisting cycle must be operated, within 6 seconds is required between 2 demisting cycles
÷
In case of malfunction, see the section "Air conditioning and heating control unit" page 114
or
to enter in the setup menu. The temperature SetPoint is flashing
again to display the desired temperature in the cab.
that is controlled according to the temperature setpoint. To change the speed:
pour entrer dans le menu de réglage de la ventilation
or
to select the desired speed ventilation from.
to enter in the demisting control menu. The air conditioning and the heating are drived
or
to adjust the desired speed ventilation from.
5 - Operation
to
or the automatic control of the
to
2
à
and
99

Advertisement

Table of Contents
loading

Table of Contents