Table of Contents
Advertisement
6 - Maintenance
50 Hours Service - Greasing the Pump
Grease is necessary every 50 hours with 30 grams of grease into each
lubrication point, when operating the pump.
μ
ATTENTION! In order to avoid excessive wear, it is important to
use a recommended lubricant! See the section "Recommended
Lubricants" for more information.
μ
ATTENTION! When greasing the pump MUST be stopped!
50 Hours Service - Transmission Shaft (PTO)
1. Check function and condition of the transmission shaft protection
guard. Replace any damaged parts.
2. Lubrication. See "Lubrication and Oiling Plan - PTO" on page 140.
100 Hours Service - Re-tightening the Spray Boom
Due to several movements of the spray boom from driving in the field with an unfolded boom, you must re-tighten all
bolted connections on the boom centre and boom wings.
250 Hours Service - Hydraulic Circuit
Check the hydraulic circuit for leaks. Repair if needed.
250 Hours Service - Hoses and Tubes
Check all hoses and tubes for possible damage and proper attachment. Replace damaged hoses or tubes.
In general, always replace a hose or tube if:
• It is leaking.
• Reinforcement material inside the hose is visible due to cracks in the outer layers.
106
Advertisement
Table of Contents
