4 - Sprayer Setup
Support Leg
The support leg is stored in the bracket on the sprayer's right side when
the sprayer is attached to the tractor.
To use the support leg
1. Lift the leg off the storage bracket.
2. The support leg can then be mounted to the drawbar extension
on both sides as preferred (high hitch left side only).
3. Secure with the linchpin.
To remove the support leg
1. Lift the leg.
2. Remove the linchpin and pull out the support leg.
3. Secure the leg at the storage bracket with the linchpin.
Jack Up the Sprayer
When the sprayer needs wheel mounting or changing of wheels, wheel
bearings or brakes etc., jack up the sprayer under the axle as shown.
€
DANGER! Be sure to place sprayer at level and firm ground to
prevent the sprayer falling down from the jack. It is good practice
to:
• use stop wedges at the opposite wheel to prevent rolling
• connect the sprayer's drawbar to a tractor to help balance the
sprayer on the jack.
68