Table of Contents
Advertisement
3 - Description
Sprayer Use
The HARDI sprayer is for the application of crop protection chemicals and liquid fertilizers. The equipment must only be used
for this purpose. It is not allowed to use the sprayer for any other purposes. If no local law demands that the operator must
be certified to use spray equipment, it is strongly recommended to be trained in correct plant protection and in safe
handling of plant protection chemicals to prevent unnecessary risk for persons and the environment, when carrying out
your spray job.
Frame
Very strong and compact steel frame with a strong chemically resistant and weatherproof electrostatic lacquer coat. Screws
and bolts etc. have been Delta/Magni treated to be resistant to corrosion.
Tanks
The tanks are made of impact-proof polyethylene, resistant to UV radiation and chemicals. The main tank has a purposeful
design with no sharp corners for easy cleaning. The filling hole is placed so it can be accessed from the platform. This ensures
an easy access for the filling of sprays, cleaning of the tank etc. The sprayer may also be equipped with a rinsing tank and a
clean water tank. A large, easy-to-read tank level indicator can be placed besides the platform, where it is visible from the
tractor cabin and in the work zone of the sprayer.
Nominal tank contents are 5000 or 6000 litres.
Lifetime
The expected lifetime for the sprayer is 20 years. To obtain this successfully, these instructions should be followed:
• All service and maintenance work must be completed in due time
• Repair any damages parts as quickly as possible
• Replace or change spare parts as needed
• Only use original HARDI spare parts.
46
Advertisement
Table of Contents
