Table of Contents
Advertisement
Installation
2
2-1.
Ceiling
mount
without switch box
Accessories
used in this installation
Retaining spring x 2
2
Make a ø45 mm (1.77") hole in the ceiling for mounting.
ø45 mm
(1.77")
4
Mount the detector on the ceiling.
(Be sure to arrange the wires with a downward slope to prevent water igress into the detector.)
1
Install a retaining spring on both sides.
(follow the illustrated arrow steps to complete the assembly of the retaining spring.)
3
Insert the detector into the hole with the retaining spring facing up.
5
2
3
1
Advertisement
Table of Contents
