Installation
2
2-1.
Ceiling
mount
without switch box
Accessories
used in this installation
Retaining spring x 2
2
Make a ø45 mm (1.77") hole in the ceiling for mounting.
ø45 mm
(1.77")
4
1
Install a retaining spring on both sides.
(follow the illustrated arrow steps to complete the assembly of the retaining spring.)
Mount the detector on the ceiling.
(Be sure to arrange the wires with a downward slope to prevent water igress into the detector.)
3
Insert the detector into the hole with the retaining spring facing up.
Transmitter
5
2
3
1