Yamaha XSR MTM690 2016 Service Manual page 99

1. Coolant reservoir hose
2. Radiator inlet hose
3. Thermostat housing
4. Oil cooler inlet hose
5. Coolant reservoir breather hose
6. Coolant reservoir
7. Coolant reservoir cap
8. Radiator
9. Radiator cap
10. AC magneto lead
11. Horn lead
12. Frame
A. Fasten the coolant reservoir hose to the radiator
inlet hose with the plastic locking tie. Position the
coolant reservoir hose directly under the radiator
inlet hose. Face the buckle of the plastic locking tie
inward with the end pointing downward.
B. Align the white paint mark on the radiator inlet
hose with the projection on the thermostat housing.
Install the radiator inlet hose onto the thermostat
housing, making sure that the hose contacts the
projection on the housing.
C. Point the ends of the hose clamp outward.
D. Install the coolant reservoir hose onto the coolant
reservoir cap, making sure that the hose contacts
the cap.
E. Face the catch of the holder forward.
F. Position the clamp screw within the range shown in
the illustration.
°
G. 90
H. Outward
I. Route the coolant reservoir breather hose to the
outside of the oil cooler inlet hose.
2-70
CABLE ROUTING